T-LCM Settings: Spring, Brake Force, and Deadzones - GTPlanet
网页2021年3月1日 — For me I'm currently using the set up below. Springs: Red on bottom, "pre-load spring" with 4 washers, and black on top. Brake Force: 68. Deadzones: Brake 3.0, Accelerator 0 deadzone, Clutch Default settings. What I am playing: PS4, primarily GT Sport and sometimes Dirt Rally 2.0.
Thrustmaster T-LCM throttle/clutch spring upgrade info - Reddit
网页2022年3月14日 — If you have a set of T-LCM pedals and hate the toy-like throttle/clutch feel, I highly recommend you give this mod a try! The springs are ten bucks if you get them from your local Grainger or you can have them shipped from Grainger or Zoro for a little extra. Here's a link to the springs in question: Grainger. Zoro.
T-LCM Pedals - Thrustmaster - Technical support website
网页IMPORTANT NOTE: the T-LCM Pedals pedal set is a plug and play device. It installs automatically on PC (driver download is not required). To date, no firmware update of the …
Thoughts about calibrating and using Thrustmaster T-LCM load ... - Reddit
网页2020年10月19日 — The T-LCM brake has 3 springs. The small silver spring, and two large springs which you can change stiffness on. Initially (when you first press the pedal) the 3 springs compress at the same time (following the law of springs in series ) and behave linearly until the softest spring bottoms out.
How to set up the Thrustmaster T-LCM pedals for ACC
网页2020年11月26日 — Included with the T-LCM pedals, there are six different springs, which all have different resistances and can be paired with any other spring. The six springs come in five different colours: By default, the black, pre-loading, and red springs are installed. Not only do you have this range of springs, but also five washers and two pairs of spacers:
TM T-LCM, which springs do you use? : r/simracing - Reddit
网页2021年7月15日 — But in my experience, how you calibrate it in the TM software is more important than which springs you use. You can use the hardest of springs but if your not increasing the force then your not using the load cell to it's full potential and relying on the feel of spring compression more so then the force applied.
Thrustmaster T-LCM Pedal Review - you suck at racing
网页2021年12月30日 — In the picture below, you can see the red spring on top of some yellow and red bushings and then the load cell is the silver thing below that. The brake pedal feels really similar to the PerfectPedal.
TLCM Brake Mod - OverTake (Formerly RaceDepartment)
网页2020年10月23日 — After some months I'm now on two red springs with five washers to eliminate the preload and works fine. Just looks like this kind of mod improves the curve of the brake force and also the feeling, at least this is what people says.
T-LCM Pedals Upgrade From T3PA Pro's w/Conical Brake Mod
网页2020年5月4日 — The brake pedal includes a total of six springs. Two red springs are the strongest. The black and grey are medium strength with the black being a bit stronger. A white spring that is the lightest. And the middle smaller spring that must remain between the two springs for preload effect. The black, preload and grey springs came already pre ...
T-LCM Pedals - Thrustmaster
网页ADJUSTABLE MECHANICAL BRAKE FORCE. The included set of 6 springs allows for a multitude of quick adjustments, allowing you to customize the feel on the brake pedal to your liking. Adjust the pressure force for the best fit with your racing setup (desk or table, Wheel Stand Pro, GT cockpit, F1 cockpit, etc.).