I am facing following problems while installing the MacOS installer of MCU-PLUS-SDK. It says the .dmg file is damaged and it cannot be installed. Could you please check this.

This thread has been locked. If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this ...

If you are wanting to configure a peripheral register as a DMA source or destination address, you want to use the "Manual" or "Variable/Function Name" options. Please see the explanation on the thread ...

In the reference design TIDA-01022, if the SYSREF of the ADC12DJ3200 is implemented as a single pulse clock, does it mean that only DC coupling can be used with the LVPECL interface? What should be ...

We are trying to program CDCE925PWR clock chip using CDCEL9XXPROGEVM but when we connect the programmer it gives an error in device manager "Windows cannot verify the ...

But why does this document mention uniflash also can be used on PC side? This make the reader confused.

our soc application need to open "/dev/dma_heap/carveout_edgeai_shared-memories", but in the development board, there is just 'linux,cma' and 'system' node in /dev ...

I use FDC2212, I try to measure two capacitance which are CU plane on a PCB. But capacitor interact each other. There is two shielding concept releated on datasheet. But I can not undestand How I use ...

Could you please be more specific about 1, 3, and 4? For 1, are you referring to the quiescent current and also what state (on or off)? For the junction temperature ...

My customer is trying to place the DataFlash area outside of the region setting, is there a problem? They are using IAR, it seems like IAR only have two regions can be set, and it is already used in ...

Hi folks! I would like to use this part for it's GPIO/SPI CS expansion only and not use any of the inst amp side of the chip. It's easier and faster than implementing a small micro... Can you confirm ...

To troubleshoot, I tried loading it from U-Boot. When using signed remote core firmware, the authentication verification passed successfully. However, when using ...