Solved: Printhead problems - HP Support Community - 7237134
2019年9月14日 · Pull the printhead latch all the way forward, and then press down to engage the latch. Close the carriage access door. The product initializes the printheads, and then prints an alignment page. Figure : Close the carriage access door. If these steps resolved the issue, you do not need to continue troubleshooting.
Printer message - "There is a problem with the printhead"
2017年5月22日 · With the printer turned on, disconnect the power cord from the rear of the printer. Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet. NOTE: HP recommends connecting the printer power cord directly to the wall outlet. Reconnect the power cord to the rear of the printer.
OfficeJet Pro 6968 - printhead problem - HP Support Community
2018年2月22日 · NOTE: HP recommends connecting the printer power cord directly to the wall outlet. (7) Reconnect the power cord to the rear of the printer. (8) Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Solved: Printhead Problem - HP Support Community - 9174067
2024年9月6日 · Remove the printhead carefully and check for any visible damage or debris. Reinstall the printhead firmly and ensure it is seated properly. Clean Printhead Contacts: While the printhead is out, use a soft, lint-free cloth lightly dampened with distilled water to clean the electrical contacts on both the printhead and the printer.
Solved: Officejet Pro 6830 keeps saying "Problem with printhead"
2016年12月5日 · Product: Officejet Pro 6830. Operating System: Microsoft Windows 10 (64-bit) Printer keeps saying "problem with printhead"; changed ink cartridges because they were low (thought that may be the problem, it wasn't); pulled plug from outlet, didn't work; pulled plug from rear of printer, didn't get rid of message; won't print at all or make copies.
printhead problem error message on HP 6958
2017年12月15日 · Press the Power button () to turn off the printer. Disconnect the power cord from the rear of the printer. Wait 60 seconds. Reconnect the power cord to the rear of the printer. Press the Power button () to turn on the printer. If the issue persist, I would request you contact our phone support. HP Support can be reached by clicking on the ...
Solved: Printhead appears to be missing, not ... - HP Support …
2023年9月20日 · NOTE: HP recommends connecting the printer power cord directly to the wall outlet. (7) Reconnect the power cord to the rear of the printer. (8) Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
How to replace the printhead on OfficeJet Pro 8030? - HP Support ...
2024年2月13日 · I'd be happy to help you! Follow these steps to replace the printheads in the HP product. Step one: Replace the printheads. Press the Power button () to turn the printer on. Load clean, unused, plain white, A4/Letter-sized paper in the input tray. Open the top cover of the HP product. The carriage moves to the left.
Printhead problem: Oxc19a0015 - HP Support Community - 6943321
2018年12月20日 · Wait until the printer is idle and silent before you continue. With the printer turned on, disconnect the power cord from the rear of the printer. Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
Printhead Problem - HP Support Community - 9150901
2024年8月14日 · Restart the Printer: Turn off the printer, unplug it from the power source, wait for about 60 seconds, then plug it back in and turn it on. Verify Connections: Ensure all cables (power, USB, network) are securely connected. If using a wireless connection, ensure the printer is connected to the correct Wi-Fi network. 5.