How to replace or install the drum unit - Brother USA
2. Remove the toner and drum assembly from the machine. 3. Push down the green lock lever and take the toner out of the drum. 4. Unpack the new drum unit. 5. Insert the toner in the drum. Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 6. Slide the green tab from left to right several times to clean the ...
How do I install a new drum unit or replace the drum unit?
8. Slide the drum unit and toner cartridge assembly into the printer. Make sure that you match the toner cartridge color to the same color label on the printer. 9. Close the top cover of the printer. 10. Reset the drum counter as follows: NOTE: The drum reset menu will NOT be present if the drum is replaced before the drum life reaches 0%. If ...
"Replace Drum" - Brother USA
Go to step 9 to reset the drum counter. 1. Make sure the machine is turned on. 2. Open the front cover. 3. Remove the toner cartridge and drum unit assembly from the machine. 4. Push down the green lock lever and take the toner cartridge out of the drum unit.
Difference between drum unit and toner cartridge - Brother USA
The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called "The photosensitive drum" inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure. To keep good print quality, the Brother machine detects the quality deterioration of the drum unit automatically.
'DRUM ERROR' continues to appear after drum has been replaced
The drum is a consumable item that requires periodic replacement. - If the issue continues after replacing the drum unit and your machine is within warranty, you can locate a Brother Authorized Service Center (ASC) in your area by clicking on the following link: Brother Authorized Service Center Locator . Or you can Contact Brother Customer ...
I replaced the drum unit on the machine. How do I reset
The option is only available when machine has the 'Replace Drum' or 'Drum Stop' message. 3. Press the UP OR DOWN ARROW key to select Drum Unit. Press OK. 4. Press the UP ARROW key to reset the drum unit counter. 5. The display will show 'Accepted' and the machine will return to 'Ready'. Click here to display all models covered by this answer.
"Drum Error" message - Brother USA
Clean the corona wire inside the drum unit. a. Open the front cover and remove the drum and toner assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner. b. Gently slide the green tab from side to side at least 5 to 6 times. c. Return the green tab to the home position at the far right.
How to install or replace the drum unit - Brother USA
1. Make sure the machine is powered on. Leave the machine on for at least 10 minutes to cool down. 2. Press the front cover release button and open the front cover. 3. Take out the drum unit and toner cartridge assembly by pulling on the handle in the middle of the drum unit and toner cartridge assembly. We recommend that you place the drum ...
How can I check the remaining life of the drum units? - Brother USA
The Printer Settings page lists the remaining life of the drum units. Follow the steps below to print the Printer Settings page: 1. Make sure that the front cover is closed and the power cord is plugged in. 2. Turn on the printer and wait until the printer is in the Ready state. 3.
How do I clean the drum unit? - Brother USA
Using both hands, put one piece of A4 or Letter size paper in the manual feed slot until the top edge of the paper touches the paper feed roller. When you feel the machine pull in the paper, let go. The machine will start the Drum Cleaning process. The Ready LED flashes during the Drum Cleaning process. NOTE:
- 某些结果已被删除