Shackles - Lifting Products - Crosby General Catalog
View our full range of shackles for material handling purposes including subsea, cold weather, carbon screw pin, alloy bolt type and more - only from The Crosby Group.
• Working Load Limit and grade “6” permanently shown on every shackle. • Hot Dip galvanized or self colored. • Sizes 3/8 inch and below are mechanically galvanized.
• Sizes 3/8 and below are mechanically galvanized. • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit (1/3t - 55t). • Approved for use at -40° F (-40° C) to 400° F (204° C). • …
CROSBY SCREW PIN SHACKLE DIMENSIONS G-209 & S-209 CARBON SCREW-PIN G-209 A ALLOY SCREW-PIN Nominal Size (in.) Working Load Limit (t)* G-209 Stock No. Weight
Crosby G-209 Galvanized Screw Pin Shackles - GME Supply
Crosby's Galvanized Screw Pin Shackles feature the working load limit and grade "6" permanently marked on each. These Crosby shackles are hot dip galvanized and quenched and tempered …
• Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble. • Increases usable sling strength minimum of 15% and greatly …
• Sizes 3/8 and below are mechanically galvanized. • Fatigue rated (1/3t - 55t). • Shackles 25t and larger are RFID EQUIPPED. • Approved for use at -40° C (-40° F) to 204° C (400° F). Meets or …
- [PDF]
SHACKLES
The theoretical reserve capability of carbon shackles should be at a minimum 5 to 1, and alloy shackles a minimum of 4 to 1. Known as the Design Factor, it is usually computed by dividing …
- [PDF]
SHACKLES
These Crosby shackles are fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. Ductility properties: Typical ductility properties are available for all sizes upon special request. …
Fatigue properties: Fatigue properties are available for 1/3 to 55 metric ton shackles. These Crosby shackles are fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. …