My Experience with Kano Kroil in the Bore - Ruger Forum
2016年6月7日 · Lead is NOT dissolved by ammonia based solvents. Lead is generally removed by mechanical means (a brush, Lewis lead remover, etc.) and Kroil can be a huge aid in that process. Kroil seems to help break the bond between the lead and the bore. Kroil also has proven to be a very good overall bore cleaner.
Kroil Oil - Where do you buy? - Ruger Forum
2010年10月26日 · Usually from Brownells or Midway. It is currently on sale (til 11/30) at Midway for $7.49 (vice 9.49). Brownells has a combo deal with a can of Kroil plus a jar of J&B bore cleaner - a combination I have found to work well for barrel cleaning. Unlike many products out there, you can buy it factory direct.
Kroil rusted the metal. - Ruger Forum
2009年11月5日 · Kroil rusted the metal. When I was younger I worked on old cars for a hobby. I'm talking about years like 1929, 1933, 1947, 1949, and 1956. Rust was the devil to fight. I read an article about Kroil and decided to order a gallon plus a spray can. It does creep down in places you want it to go and I think it is a good product.
Is Kroil a good rust preventative ? Lubricant - Ruger Forum
343 posts · Joined 2008. #3 · Dec 2, 2008. Kroil and WD-40 are actually more solvents than lubricants and as such they tend to offer very little protection for metals exposed to moisture. I refuse to use them on my guns as my experience with both resulted in rusted items. I'm also into RC model airplanes and made the mistake of shooting a ...
Kroil - Ruger Forum
2009年2月25日 · Kroil is a penetrating oil, not a solvent or a lubricant. If used properly, it can really work to remove lead or jacket fouling from the bore. The best way to use Kroil is to apply a liberal amount to the bore with a "mop", then set the gun where the barrel is level. Allow it to work for a couple hours then rotate the barrel 180 degrees and let ...
My Experience with Kano Kroil in the Bore - Ruger Forum
5,802 Posts. #24 · Dec 6, 2022. I use Kroil in a number of different applications. I mix it with JB bore paste, if I want to get my bore shiny and clean like new. I will use it if my bore is lead fouled. I coat a generous amount in the bore, and leave it overnight. Sometimes this works great, as I have had lead in the grooves come out easily ...
Kroil - Ruger Forum
2013年1月31日 · Kroil iis a penetrating oil with minimum lubricating and protection qualities. It has some, but a poor substitute for quality gun oil. It has many wonderful uses when used for it's intended purpose.
Mixing cleaning products? - Ruger Forum
2012年6月28日 · Likely, most mixtures will cause no harm, so the worst a person will _probably_ do is completely waste their time and money by making a totally-ineffective mixture. A mixture such as the above-listed Hoppes #9 + Kroil isn't going to hurt anything, as those are both very simple and even relatively similar things.
New MKIII standard model rear site removal | Ruger Forum
2013年6月17日 · kacher1. 114 posts · Joined 2012. #3 · Jun 18, 2013. Only the adjustable sights have set screw. The Standard sight on my Mark II can be drifted out (left to right I believe) after letting a penetrating oil like Kroil sit around it overnight. I used a piece of dowel about 4 in long to knock the rear sight out.
Removing lead from a .303 British - Ruger Forum
2016年6月7日 · Another vote for Kroil. Ammonia based cleaners are useful when attempting to dissolve copper fouling from jacketed bullets but ammonia is ineffective on lead. Lead must be physically removed and the Kroil may help loosen the bond between the lead and the steel. An old bore brush wrapped in copper Chore Boy is a good tool for lead removal.