My Experience with Kano Kroil in the Bore - Ruger Forum
2016年6月7日 · I use Kroil and Rem Oil Wipes. I came across a"few" gallons of Kroil in my dad's old workshop. I gave it a try on bore cleaning in my GP100 when shooting Missouri LSWC. It is great. I started using the Kroil with silicon and I believe it reduced leading in the bore. I shoot mostly Hi-Tec coated bullets now. Something else I discovered.
Kroil rusted the metal. - Ruger Forum
2009年11月5日 · Here's the manufacturer's link for Kroil: KanoLabs.com. Kroil is a rust penetrating oil for loosening of corroded parts. That is why it works so well at loosening fouling and why lots of rifle guys (...me included...) like it. It is a penetrant; not a lubricant. I suspect is is very closely akin to a highly refined kerosene; but i dont know for ...
KROIL - The Firearms Forum
2012年9月9日 · I was introduced to Kroil on drilling rigs in the Gulf of Mexico & later I noticed gunsmiths always had a can or two on the shelf. It seems to have no peer as a penetrating oil & it costs much, much more than its nearest competitor. It was & still is a useful tool in the salt water environment that off-shore drilling must endure.
Kroil - Ruger Forum
2009年2月25日 · Kroil is a penetrating oil, not a solvent or a lubricant. If used properly, it can really work to remove lead or jacket fouling from the bore. The best way to use Kroil is to apply a liberal amount to the bore with a "mop", then set the gun where the barrel is level.
Kroil Oil - Where do you buy? - Ruger Forum
2010年10月26日 · Like BronxBoy, I always bought Kroil directly from Kano Labs. AeroKroil, SiliKroil, and even Penephite were items I always had on-hand, usually in some quantity. Since closing the farm, I no longer have much use for the stuff, but if you do have a use for it, I recommend direct purchase.
My Experience with Kano Kroil in the Bore - Ruger Forum
2022年12月6日 · One old smiths trick for fouling is simple 0000 steel wool, and a simple push bob, some Kroil or your chosen solvent. Use it like a "bore brush" . 0000 wool is very fine and will remove lead and fouling in a few gentle passes
Kroil - Ruger Forum
2013年1月31日 · Kroil iis a penetrating oil with minimum lubricating and protection qualities. It has some, but a poor substitute for quality gun oil. It has many wonderful uses when used for it's intended purpose.
heat to remove a barrel - The Firearms Forum
2008年11月6日 · I would buy some Kroil penetrating oil, soak 'er down, and let the oil work for a few days. I hate to sound ignorant, but is the barrel made to come off of a Stevens? Some of these pumps were termed "solid frame" and not designed to be taken down. Heat in this area is just going to draw temper out of the steel.
Removing Old Oil Solvents - The Firearms Forum
2013年12月30日 · Carb cleaner, brake cleaner or just a light oil or petroleum product; a lighter oil will dissolve a heavier oil. Air compressors are a blessing to clean firearms, spray or soak gun and blast with air, brilliant! I can say Kroil is a fine penetrating oil and it does a good job as a bore cleaner, worth every penny.
New MKIII standard model rear site removal | Ruger Forum
2013年6月17日 · To avoid confusion I believe what is being referred to is "PB" Blaster, a well known and popular penetrating oil. I agree that Kroil is harder to find (I usually track it down at mom and pop hardware stores or farm and ranch stores) but it also tends to work better, especially on heavily rusted/frozen parts, than PB Blaster, Liquid Wrench or WD4.