loctite 262 vs. 271 - Harley Davidson Forums
Feb 18, 2011. #4. glimmerman said: if h-d says to use 262, it means 2-6-2 and not 2-7-1. I hear what your saying but I myself would not get too carried away with using the exact Loctite number. Type 271 & 262 are very similar to each other. I have used both and found the 271 to cure pretty fast, almost while your tightening the bolt.
Loctite - Harley Davidson Forums
Feb 27, 2008. #5. I work at a power plant and use at least a dozen Loctite products. Blue is for fasteners. 242 comes apart with a wrench, 262 with a big wrench, and 292 with a torch and a big wrench. They also sell a primer that increases the bond strength. I've twisted 3/4'' bolts in two that were primered and set with 292.
Using Locktite - Harley Davidson Forums
2008年4月15日 · Loctite 242 - Medium Strength (LOC-24221, LOC-24231) Make ordinary nuts vibration-proof! Loctite 242 holds bolts and cap screws securely, while sealing out air and moisture, thus preventing wear and corrosion. Nuts can be removed with ordinary hand tools. Temp. range: -65º to 300ºF (-54º to 149ºC). Loctite 262 - High Strength (LOC-26221)
Question on loose compensator bolt - Harley Davidson Forums
2010年10月23日 · 2. Place drive components (primary chain, compensating sprocket assembly, and clutch assembly) into position. The clutch hub and shaft extension are splined, so a slight rotation of the chain drive will aid installation. 3. If reusing bolt (6), remove threadlocking material from bolt and engine sprocket shaft.
FLT 1990 main drive gear vs. spacer | Harley Davidson Forums
2012年6月30日 · A new pulley nut should come with the relevant Loctite (262) on the threads ensure the main drive threads are fully clean and torque to 150 lbs-ft then check for lock bolt position you can tighten up to 160 lbs-ft to get the lock bolt in correct position
Clutch Basket Bolt Torque Specs??? - Harley Davidson Forums
Moderator. Contributor. Sep 24, 2013. #2. For the nut that holds the clutch basket in place 70 - 80 ft-lbs and if i remember correctly 2 drops of loctite 262 on the threads that info is for a 94 but pretty sure will be similar for the 98. Brian.
front pully splines stripped out | Harley Davidson Forums
Moderator. Aug 15, 2011. #7. the draggin said: We have a 1992 FLHP that has twice now stripped out the splines on the inside of the pully and there is no visable wear on the transmission out-put shaft. The last time about two years ago the new pully fit snugly had to be tapped on. The lock-nut was install and torqued to factory specs.
Transmission | Page 7 | Harley Davidson Forums
2014年4月6日 · Post all your Primary, transmission and driveline questions here. Prev. 1 … Go to page
Question on loose compensator bolt | Page 2 | Harley Davidson …
2010年10月23日 · Locktite 262 is also a "high strength" Red locker which is the stuff HD actually says to use on the compensator bolt. Another good medium strength Red locker is 242 which has a fairly long working time.
Loctite for drain plugs | Harley Davidson Forums
Guest. Sep 15, 2014. #1. Loctite 565 Thread Sealant. Top Pick Loctite® 565™ Thread Sealant, controlled strength, is formulated specifically for metal tapered pipe thread fittings. Controlled lubricity prevents galling and protects from rust and corrosion. Loctite 565 replaces most tapes and pipe dopes. Cures rapidly to withstand 10,000 psi.